Loudspeaker line isolator
Fault Isolator Module
Loopdrive - FIM
The Loopdrive originally designed housing in combination with colored WAGO push-terminals are a guarantee for a fast and correct installation of the device. The transparent cover enhances the emitting light signals from the on-board status indicators of the FIM. Fault indications can be easily identified during installation.
An external General Fault indicator output can drive a remote indicator where visual status feedback of the FIM is requested.
Wago push terminals
The WAGO push terminals used on the FIM accept from 0,8 to 2,5 mm2 core installation cable. A simple but effective tie-wrap quickly secures the cable onto the loopdrive housing.
Sliding to open
An additional adapter can be ordered to the unit that increase the IP-rating from IP21 to IP33 by adding compression glands that take up 8 to 13 mm sized installation cable.
The additional adapter comes with fitting screws and three compression-glands and can be ordered separately.
Complementary 20 mm gland allows for quick and easy installation onto the firedome of the loudspeaker using one of the existing cable gland entries of the loudspeaker.
(See installation guide below)
The T-branch output of the FIM interfaces directly with the input of the single loudspeaker through the fixing-hole of the Loopdrive housing and the compression gland.
No extra cable !
No extra junction box !
Plug and Play adapter
The LoopDrive plug and play wiring range of devices revolutionize the way audio isolator systems are installed. It cuts installation costs, reduces waste, improves site efficiency, enhances site safety and accelerates construction programmes.
Reduced installation costs
Quick and simple to install
Cables can be ordered in pre-determined lengths with factory fitted and tested plugs at either end. These loop cables plug directly into the plug and play adapter with fitting female sockets and are locked into place with minimum effort.
Plug-and-Play key features:
Reduced installation time by up to 70%
Rugged components – Factory Assembled
Minimal skill level required
Certainty of correct installation
Easily integrated with conventional installation methods.
The loop cable plug directly into the plug and play adapter with fitting female sockets and are locked into place with minimum effort.
The loop cable plug and play directly into the speaker with socket.