COMPACT500
Voice Alarm Solution
Fully compliant:
In order to ensure peace of mind for both the installer and end user, 4EVAC products are third party approved and certified to relevant European standards. 4EVAC approvals go beyond the minimum requirements including EN54-16:2008, EN54-4:2006, and EN50130-4:2011. CPR number : 0560-CPR-152190001/00.
​
4EVAC new range of products stands for lower costs of installation, maintenance and ownership. Designed to meet from the basic normative requirements up to most demanding needs of engineers, facility managers, building owners and electrical contractors. 4EVAC range of products builds upon the field-proven design culture of experts in de fire-safety and voice-alarm market.
This shows a basic system configuration where the Compact 500 fits perfectly! Serving a high-rise building structure. Equipped with 6 evacuation zones the wall-box is installed in the main entry area where it can be easily observed and controlled in case of an incident. The frontpanel controls are adequately accessible and the integrated firemensmicrophone provides clear vocals into the evacuation zones.
​
System configuration
• Zone 1: Parking area, 85 W (CH-1);
• Zone 2: Floor 1, 65 W (CH-2);
• Zone 3: Floor 2, 95 W (CH-3);
• Zone 4: Floor 3, 100 W (CH-4);
• Zone 5: Floor 4, 85 W (CH-5);
• Zone 6: Floor 5, 85 W (CH-6);
Compact 500 is equipped with a wide range of pre- and post-processing software modules such as volume controllers, routing, mixing, switching and prioritizing. Processing components as; equalisers, limiters and delay-lines make Compact 500 fit for the job.
The integrated local Message storage modules (WAV-format), with a total storage capacity of 16 audio files, can be distributed simultaneously over the 6 local output lines serving phased-evacuation. The status of the digital audio message storage and of the messages themselves are monitored. All message-storage modules are synchronised between multiple Compact 500 output lines for synchronized large area incident warning.
Control/Indications & Firemen microphone at access level 2
Battery compartment
The Compact 500 comes with a special battery bracket that can hold batteries from a minimum of 12 V/10 AH to a maximum of 12 V/55 AH. The integral battery charger, PSE, has been certified to charged up to 12 V/55 AH within 24-hours.
For a standard fully equipped installation with 3-DA200 amplifiers and a backup DA-200 amplifier, that needs to run for the minimum normative period of 30 minutes on full-load and 24 hours in quiescent state, it requires 12 VDC 38 AH batteries.
In case de Compact 500 is not fully equipped with the maximum number of DA200 amplifiers and/or not loaded to the maximum extent of 600 W, there is a choice of batteries in the range of 12 V/10 AH to 12 V/55 AH, or when longer selfsupporting periods are required, i.e. when there is no maintenance contract in place.
4EVAC Manager
4EVAC Manager is a management application tool that provides a comprehensive application specific interface to your Compact 500 networked system. The software provides an easily accessible view of your overall system status and makes system operation very easy through an intuitive and secure configuration tool that makes complex programming and service easier than ever.
4EVAC Manager is the ideal addition to your Compact 500 system management in complex facilities.
-
Configuration software supports all integrated system components;
-
Firmware upgrades in the field;
-
Flashcard exchange protocol for quick system update / programming without the direct need for a computer.
COMPACT500
Single cabinet, fully operational Voice Alarm System that includes:
C500/1
​
​
​
​
C500/2
​
​
​
​
C500/3
​
​
​
​
C500/1+1
​
​
​
​
​
C500/2+1
​
​
​
​
200 WATT, 2Ch :
-
1x 2ch-audio amplifier (2x100W/ch),
-
AC surveillance based om puls-20kHz signal with EOL
-
Includes mandatory C500 basics as listed with C500/3+1
​
400 WATT, 4ch :
-
2x 2ch-audio amplifier (2x100W/ch),
-
AC surveillance based om puls-20kHz signal with EOL
-
Includes mandatory C500 basics as listed with C500/3+1
​
600 WATT, 6ch :
-
3x 2ch-audio amplifier (2x100W/ch),
-
AC surveillance based om puls-20kHz signal with EOL
-
Includes mandatory C500 basics as listed with C500/3+1
​
200 WATT 2ch, with additional SPARE amplifier:
-
1x 2ch-audio amplifier (2x100W/ch)
-
1x 2ch-backup amplifier (2x100W)
-
AC surveillance based om puls-20kHz signal with EOL
-
Includes mandatory C500 basics as listed with C500/3+1
​
400 WATT 4ch, with additional SPARE amplifier:
-
2x 2ch-audio amplifier (2x100W/ch)
-
1x 2ch-backup amplifier (2x100W)
-
AC surveillance based om puls-20kHz signal with EOL
-
Includes mandatory C500 basics as listed with C500/3+1
C500/3+1
600 WATT 6ch, with additional SPARE amplifier:
-
3x 2ch-audio amplifier (2x100W)
-
1x 2ch-backup amplifier (2x100W)
-
AC surveillance continuously or puls-20KHz signal with EOL
Mandatory C500 basics: -
Charger: Battery charger included for 10 - 55AH.
-
Controls: Firemen-microphone with front-end controls.
-
Local Audio Network: 3x L-Net for remote control devices.
-
Global Audio Network: 2x G-Net for ring
-
AC surveillance continuously or puls-20kHz connectivity to up to 255 C500 units.
-
Expandable with SW6 - zone expander module.
-
Expandable with LDB - Loopdrive system.
-
Dimensions: 80x53x27 cm
-
Weight without batteries: 28kg
-
Max. additional battery load: 33kg
-
IP-rating: IP30
-
EN54-16 & EN54-4
COMPACT500
Accessories
DA200S
​
​
DA200A
​
​
T100/50
Backup amplifier module
-
1x 2ch-backup amplifier (2x100W/ch)
​
Amplifier module
-
1x 2ch-Amplifier (2x100W/ch) without transformers
​
Toroid Output transformer; 100V / 50V
T100/70B
​
4E-PB7
Toroid Output transformer; 100V / 70V
​
Compact500 pushbutton expansion unit;
-
1x 7button expansion sticker with connection PCB (For Compact500 only).