top of page
Fond4evacbleu.jpg

Accessories

4E-TBOX-W

TERMINALBOX FOR DIN-RAIL ACCESSIORIES

 

  • Surface mount wall box with 2x DIN-RAIL for mounting 6x SW6/ GPIO & FSC, RAL7035

  • Supplied with 2x ABS pre-punched PG plates & 6x sheet-steel cover plates

  • Window

  • 500x300x120mm (WxHxD)

4E-TBOX-W.png
4E-TBOX

  • Same as 4E-TBOX-W but WITHOUT WINDOW

4E-FPI & 4E-RPI

The 4E-FPI and 4E-RPI L-Net power injectors provides additional power injection point to the L-NET (Local Network bus of 4EVAC Voice Evacuation System), where an auxiliary DC power supply may be connected. Thanks to the L-net power injector, more L-Net devices with relatively high power consumption (such as touchscreen paging microphones) can be installed on the same CAT5e cable, devices can be installed in larger distances from the central equipment and further away from each other.

4E-FPI

  • L-Net power extender

  • Max. 30VDC / 2Amp

  • Power adapter / Supply not included

​

4E-RPI:

  • L-Net power extender

  • Max. 30VDC / 2Amp

  • Power adapter / Supply not included

fpi_edited.jpg

4E-FPI

 

 

 

​

​

​

​

 

 

 

 

 

 

 

 

4E-RPI

4E-EOL/10

PASSIVE - End Of Line module, package of 10PCS;

 

  • Cascadable load setting for: 250 ohm or (cascaded) 125 ohm @ 20kHz

  • 10x Thermal fuse

  • 10x Connection lead (100mm)

  • 5x LINK-connector

  • 10x Protection rating sleve

  • 10x EOL

  • EN54-16

4E-EOL10_edited.png
4E-B3U/10, 4E-B2U/10 & 4E-B1U/10

BLINDPANEL

​

  • 19-INCH rackmount blindpanel incl. fixing screws. 1HU, 1.2mm, RAL3011

  • PACKAGE OF 10 PCS.

4E-B2U10.png
4E-V1U/10

VENTILATIONPANEL

 

  • 19-INCH rackmount ventilationpanel incl. fixing screws. 1HU, 1.2mm, RAL3011

  • PACKAGE OF 10 PCS

4E-V1U10.png
4E-VACIE-TOOL

VACIE hand-tool for COMPACT & IMPACT commissioning and service purpose

 

  • Broadband impedance measurement: 10ohm - 20kohm @ 100Hz-50kHz

  • Adjustable center frequency

  • Frequency ‘Z’-sweep Plotter 100Hz - 50kHz

  • Frequency generator 10Hz - 20kHz , -40 / 0 dBv

  • EOL (manual) tune

  • EOL (automatic) tune • Ground leakage

  • Includes: Tool with battery, carrying case, test cables, USB-charging cable

hop.jpg
4E-LDB-RS485

LDB-RS485 serial, Line Adapter;

 

supplied with:

  • Interface

  • USB cable, 1 mt.

  • 4pin-Phoenix connector

01_edited.jpg
4E-BOB

4E-BOB is a DIN-Rail mounted breakout box that is used to provide breakout cabling for the RS422 Link. This unit is handy for the users in troubleshooting connections problems in the local and global net RS422 link of 4Evac voice Evacuation network.

 

Rack-mount Break-Out-Box for G-NET & L-NET, incl.L-NET Power Injector;

  • Break-IN/OUT to run conventional copper cable

  • L-Net power extender

  • Max. 30VDC / 2Amp

  • Power adapter /  Supply not included"

4E-C500-RS422

4EVAC Manager programming interface;

​

L-Net line adapter is supplied with:

  • C500-RS422 serial, L-Net Programming Adapter

  • GUI driver

  • USB to CAT5 L-Net interface module

  • USB cable, 3 mt.

  • Crossed CAT5e cable

03.jpg
bottom of page